Showing posts with label Veils. Show all posts
Showing posts with label Veils. Show all posts
Wedding Accessories Part 1 : Veils
Labels: Accessories, Tips, VeilsHere are some of the tips and things should know when you are purchasing your veil or headpieces;
1) Always check your rear view when trying on a veil. To show off the back of your wedding dress, choose a sheer or single-layer design.
2) A simple, unembellished veil flatters an elaborate wedding dress best, while a classic gown can be paired with a plain or an ornate confection.
3) Any adornments on your veil should begin below the point at which your dress ornamentation ends—this way the two won’t compete.
4) Take a brisk walk with your headpiece to make sure that it stays firmly in place. You don’t want to lose it before you reach the altar.
5) Take your face shape into account when making your selection. A veil that falls straight down narrows a round, full visage; a waterfall design adds width to an oblong face. A square jaw benefits a longer veil, while a heart-shaped face looks best with a veil that falls behind the neck.
6) Planning to doff your veil after the "I do’s"? Invest in a headpiece—try a wide satin headband—that looks good without the tulle. The headpiece should have fabric hooks and loops or Velcro fasteners for easy veil removal.
7) Make sure your blusher veil is long enough to flip over your head.
In case you are still blurry about the terms used when it comes to veils, here are some pictures to help you out. As they say, picture says a thousand words ^_^V
a) Birdcage Veil (also known as birdcage veil)
A short, single layer worn over the face, then lifted back over the head during the ceremony.
b) Cathedral Veil
Trails two to three metres behind the wedding dress.
3) Chapel Veil
Extends a lil bit longer than the floor length.
4) Double Tier Veil (Double Layers Veil)
A veil of two layers, usually of different lengths (either two veils or a veil and blusher). It comes with a comb for easy wearing.
5) Elbow Length
Extends to the bride’s elbow.
6) Fingertip Length
Reaches fingertips when arms are relaxed; the most versatile style.
7) Flyaway
A multi-layered veil that just brushes the shoulders and gives a clear view of the back of the wedding dress.
8) Fountain Veil
A shoulder- or elbow-length veil gathered at the crown of the head and cascading around the face to form a "fountain" shape.
9) Mantilla Veil (or known as Lace Trim Veil)
A Spanish-inspired style: a piece of lace or lace-edged tulle, secured with a comb and framing the face; may be any length between elbow and ballet.
10) Ribbon-edge Veil
A veil with a line of ribbon stitched around its edge.
Source : http://www.brides.com/
Disclaimer: The only veils that we have available for sale are Ribbon Edge Veil and it's very limited so please call to check the availability if you are interested. :)
Next >>>>> Wedding Accessories Part 2 : Headpieces
How To Make Your Own Veil
Labels: Accessories, Advice, DIY, Tips, Veils
How To Make Your Own Veil
The Lengths - Although there are slight variations, here are the standard measurements for veils:
to Shoulder -> 18"
to Blusher/Elbow -> 24"
to Waist -> 30"-36"
to Fingertip -> 40"-45"
to Knee -> 54"
to Chapel/Floor -> 60"-72"
Cathedral -> 144"
*But if you are doing it yourself, the best plan is to simply measure where you want it to fall on you and create your own custom length.
Materials:
1) Fabric - Tulle, organza, chiffon, silk, etc. Length is up to you! Measure the length from where on your head it will attach down to where you'd like it to fall.
2) Thread - Select thread that matches the color of your veil or use silver metallic thread if your edging will be silver metallic.
3) Comb - Any plastic comb will do, but clear/transparent is probably the best color.
4) Trims - For examples, crystal beads, pearl colored beads, sequins, ready made trims, satin cording and ribbon. Any trim that is ready made will be faster than sewing on individal beads or sequins when making a bridal veil.
Instructions:
Once you have the piece of fabric cut to desired length and width you will need to sew on your trim. Some fabrics actually do not need trim as they won't unravel, but most look best trimmed. You will only need to trim three sides of the veil since the top of the veil will be sewn onto your comb. Fold over the edge of the veil and add your trim to the three sides using a needle and thread. The trim shown is white satin cord.
Before trimming, you may want to round out the bottom edges of the veil. Place a CD disc on the corner and trace the round contour and then cut the rounded corner with scissors. This is optional.To attach the trimmed veil to the comb, find the center of the top edge of your veil and sew it onto the center of your comb. Bunch up the veil and continue to sew it onto the comb. Make sure you sew it onto the outside of the comb, the convex (rounded out) side.
Finish making your bridal veil by adding matching trim or beads to the top of the sewn on part of your comb. This will cover up any visible stitches.
Always a good idea to have someone help you with your veil. I advise that even with a comb, a few bobby pins should be used to secure the veil in place.
So get yourself to a fabric store and start looking for veil fabric and trims so you can start making a bridal veil!
The Lengths - Although there are slight variations, here are the standard measurements for veils:
to Shoulder -> 18"
to Blusher/Elbow -> 24"
to Waist -> 30"-36"
to Fingertip -> 40"-45"
to Knee -> 54"
to Chapel/Floor -> 60"-72"
Cathedral -> 144"
*But if you are doing it yourself, the best plan is to simply measure where you want it to fall on you and create your own custom length.
Materials:
1) Fabric - Tulle, organza, chiffon, silk, etc. Length is up to you! Measure the length from where on your head it will attach down to where you'd like it to fall.
2) Thread - Select thread that matches the color of your veil or use silver metallic thread if your edging will be silver metallic.
3) Comb - Any plastic comb will do, but clear/transparent is probably the best color.
4) Trims - For examples, crystal beads, pearl colored beads, sequins, ready made trims, satin cording and ribbon. Any trim that is ready made will be faster than sewing on individal beads or sequins when making a bridal veil.
Instructions:
Once you have the piece of fabric cut to desired length and width you will need to sew on your trim. Some fabrics actually do not need trim as they won't unravel, but most look best trimmed. You will only need to trim three sides of the veil since the top of the veil will be sewn onto your comb. Fold over the edge of the veil and add your trim to the three sides using a needle and thread. The trim shown is white satin cord.
Before trimming, you may want to round out the bottom edges of the veil. Place a CD disc on the corner and trace the round contour and then cut the rounded corner with scissors. This is optional.To attach the trimmed veil to the comb, find the center of the top edge of your veil and sew it onto the center of your comb. Bunch up the veil and continue to sew it onto the comb. Make sure you sew it onto the outside of the comb, the convex (rounded out) side.
Finish making your bridal veil by adding matching trim or beads to the top of the sewn on part of your comb. This will cover up any visible stitches.
Always a good idea to have someone help you with your veil. I advise that even with a comb, a few bobby pins should be used to secure the veil in place.So get yourself to a fabric store and start looking for veil fabric and trims so you can start making a bridal veil!
Subscribe to:
Posts (Atom)
